Provides protection against :
Organic Vapours (boiling point > 65ºC) (A1).

Common Applications/Hazards:
For protection when cleaning with or using organic solvents e.g. toluene, xylene and MEK.
Also degreasing, mixing, using paint thinner, lacquers and glues.

Protection Factors :
Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels.

This cartridge / filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels :

With a 3M 6000/7500 Series Half Face Respirator :
For airborne concentrations up to 10 times the Workplace Exposure Standard (WES) or 1000 ppm, whichever is the lower

With a 3M 6000/7800 Series Full Face Respirator:
50 x WES or 1000 ppm, whichever is the lower

• 3M™ Bayonet Connection System ensures precise and secure locking
• Low profile and well balanced twin filter design
• Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators

Suggested Applications

• Common Applications/Hazards :
  For protection when cleaning with or using organic solvents e.g. toluene, xylene and MEK. Also degreasing, mixing, using paint thinner, lacquers and glues