Provides protection against :
Organic Vapours (boiling point > 65ºC) Inorganic & Acid Gases, Ammonia and Methylamine (A1B1E1K1).

Common Applications / Hazards :
For protection when working with a variety of chemicals such as organic vapours, chlorine, hydrogen chloride, sulphur dioxide, hydrogen fluoride, hydrogen sulphide, ammonia, methylamine, and formaldehyde.

Protection Factors Note :
That any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels.

This cartridge / filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels :

With a 3M 6000/7500 Series Half Face Respirator :
for airborne concentrations up to 10 times the Workplace Exposure Standard (WES) or 1000 ppm, whichever is the lower

With a 3M 6000/7800 Series Full Face Respirator :
50 x WES or 1000 ppm, whichever is the lower

3M™ Bayonet Connection System ensures precise and secure locking

Low profile and well balanced twin filter design

Suitable for use with 3M™ 6000/7500 Series Half Face Respirators and 3M™ 6000/7000 Series Full Face Respirators

Suggested Applications

• Common Applications/Hazards :
  For protection when working with a variety of chemicals such as organic vapours, chlorine, hydrogen chloride, sulphur dioxide, hydrogen fluoride, hydrogen sulphide, ammonia, methylamine, and formaldehyde